Synthetic teak decking in Heeg

Heeg is located on the Heegermeer and is one of Friesland’s busiest watersports destinations. With marinas and boatyards such as Ottenhome Heeg, Jachtwerf Heeg and Jachthaven Van Roeden Watersport, there are many berths close together. Sailing yachts, motor yachts and open motorboats come and go throughout the season, and that intensive use can leave its mark on a teak deck.

On many boats in Heeg, you can already see it from the jetty: the wooden teak deck has turned grey, developed cracks or needs maintenance before the boating season has even properly started. Jachtwerk offers a solution with a made-to-measure synthetic teak deck.

Jachtwerk is based in Lemmer, approximately 25 kilometres from Heeg, and works for boat owners throughout Friesland and the rest of the Netherlands. Our team replaces worn decks with durable synthetic teak decking that stays looking good for years and requires little maintenance.

Wondering how much a synthetic teak deck for your boat will cost? Request a no-obligation quotation.

Personal service

Short lines of communication with one dedicated point of contact.

Attention to detail

We work on your boat with precision and care.

Service at your location

With our full-service approach, we take care of everything for you and, if required, can carry out the work at your location.

The benefits of synthetic teak

Compared with a traditional wooden deck, synthetic teak decking offers several clear advantages.

  1. Keeps looking good for years.
    The material hardly discolours and remains even and retains its shape, even after years on the water.
  2. Resistant to the elements.
    Sun, rain and wave action have little effect on the deck. Even on a busy lake such as the Heegermeer, the material retains its quality.
  3. Easy to clean.
    A soft brush and some water are usually all you need. There is no need for sanding or oiling.
  4. More grip on board.
    The non-slip surface provides good grip even when the deck is wet, for example when mooring in a lock or marina.
  5. Comfortable underfoot.
    The deck does not heat up quickly, even on a hot summer’s day on the water.
  6. More cost-effective in the long term.
    The purchase price is comparable to traditional teak, while maintenance costs are considerably lower in the years that follow.
Noordkaper voorzien van kunststof teakdek

De voordelen van kunststof teak

Een kunststof teakdek heeft, vergeleken met een houten dek, een aantal duidelijke voordelen. Hieronder zet we ze op een rij.

1. Blijft jarenlang mooi.
Het materiaal verkleurt nauwelijks en blijft glad en recht, ook na jaren op het water.

2. Bestand tegen weer en wind.
Zon, regen en golfslag hebben weinig invloed op het dek. Ook op een druk bevaren meer als het Heegermeer blijft de kwaliteit op peil.

3. Snel schoon.
Een zachte borstel en wat water zijn meestal genoeg. Schuren of oliën is niet nodig.

4. Meer grip aan boord.
Dankzij de antisliplaag staat u ook op een nat dek stevig, bijvoorbeeld bij het aanleggen in de sluis of de haven.

5. Aangenaam onder de voeten.
Het dek wordt niet snel te heet, ook niet op een volle zomerdag op het water.

6. Voordeliger op de lange termijn.
De aanschafprijs ligt in lijn met houten teak, maar u bespaart flink op onderhoud in de jaren erna.

Have your synthetic teak deck installed or install it yourself

Jachtwerk offers several ways to install synthetic teak decking on your boat. The best option depends on the condition of your existing deck and your requirements.

  1. Have a new deck bonded.
    Is your boat’s surface already ready for a new deck? We carefully bond the synthetic teak decking to a GRP/polyester or steel substrate.
  2. Let us take care of the complete project.
    Does the old deck still need to be removed? Jachtwerk takes care of the entire process: removing the existing deck, preparing the substrate and bonding the new synthetic teak deck.
  3. Install it yourself with our panel service.
    Prefer to do the work yourself? Through our panel service, you can order made-to-measure deck panels, including an adhesive layer and clear installation instructions.
    Please note: our panel service is intended for the Dutch market.
Medewerkers Jachtwerk plaatsen kunststof teakdek in cockpit van Quicksilver speedboot tijdens upgrade werkzaamheden.

Kunststof teakdek laten leggen of zelf installeren

Jachtwerk biedt verschillende manieren om een kunststof teakdek op uw boot aan te brengen. Welke optie het beste past, hangt af van de staat van uw huidige dek en uw wensen.

1. Nieuw dek laten verlijmen.
Is de ondergrond van uw boot al gereed voor een nieuw dek? Dan verlijmen wij het kunststof teakdek zorgvuldig, op een polyester of stalen ondergrond.

2. Volledig laten verzorgen.
Moet het oude dek er eerst nog af? Jachtwerk regelt het hele traject: het verwijderen van het oude dek, het voorbereiden van de ondergrond en het verlijmen van het nieuwe teakdek.

3. Zelf installeren via de paneelservice.
Doet u het liever zelf? Via onze paneelservice bestelt u panelen op maat, inclusief lijmlaag en een duidelijke werkbeschrijving.

Install it yourself with our panel service

Would you like to configure and install your own deck? Jachtwerk’s online panel service allows you to arrange everything in just a few steps.

You immediately see the price per square metre and can configure the deck to your requirements, including the colour, layout and dimensions. The panels are made to measure and supplied with an adhesive layer, ready for installation at your berth in Heeg or wherever your boat is stored.

This option is designed for boat owners who enjoy doing the work themselves. The step-by-step instructions explain exactly what you need and how to install the panels. Allow for a lead time of approximately 2 to 3 weeks, so your new deck will soon be ready for installation.

Please note: our panel service is intended for the Dutch market.

Refit synthetic decking color Bleached

Zelf aan de slag met de paneelservice

Wilt u zelf een dek samenstellen en installeren? Met de online paneelservice van Jachtwerk regelt u dat in een paar stappen.

U ziet direct de prijs per vierkante meter en stelt het dek samen zoals u dat wilt: kleur, indeling en afmetingen. De panelen worden op maat gemaakt en geleverd met een lijmlaag, klaar om te installeren op uw ligplaats in Heeg of waar u de boot ook stalt.

Deze werkwijze is gemaakt voor booteigenaren die zelf graag de handen uit de mouwen steken. Het stappenplan laat precies zien wat u nodig heeft en hoe u te werk gaat. Reken op 2 tot 3 weken levertijd, zodat uw nieuwe dek snel klaarligt.

Why Jachtwerk works with Flexiteek

For its synthetic teak decking, Jachtwerk works with Flexiteek, one of the better-known names in synthetic teak. The material is made from high-quality PVC with a grain structure that resembles real wood and is supplied to more than 200 boatbuilders worldwide.

The decking is resistant to cracking, mould, stains and scratches. UV radiation and water also have little effect on the material, helping your deck stay in good condition for many years. Thanks to its non-slip surface, you have good grip on board, even in the rain or when the deck is wet after swimming.

As a Jachtwerk customer, you also have access to maintenance products specifically developed for this material.

Colour options for your synthetic teak deck

In addition to complete teak decks, Jachtwerk also makes rubbing strakes and toe rails in the colour and dimensions you require. Every component is made to measure for your boat.

Below you can find the Flexiteek colour range:

These customers chose us before you

Compromis 999 Jacht

C-Yachts Zeilboot

Nauta Maritiem Sloep

Friendship Zeilboot

Waterspoor 777/808 Sloep

Beneteau Flyer Kruiser

Frequently asked questions about synthetic teak decking in Heeg

Would you like to have synthetic teak decking installed?

Request a no-obligation quotation for the installation of synthetic teak decking.

0
0
Winkelwagen
Empty CartDe winkelwagen is leegTerug naar winkel